Welcome to Fenco Group
You have no items in your shopping cart.
Filters
Search
Close

UNLOADER VALVES

View as Grid List
Sort by
Display per page

UNLOADER 3 - BANJO TOP HALF C/W CHEM. INJ. & 3/

Banjo Unloader Valve - Upper Half, to fit: (See Products C0.190 / C0.290/ C0.390 for Lower Half)
  • Annovi Reverberi Pumps:
  • Comet Pumps:
  • Bertolini Pumps:
  • Interpump Pumps:
  • Speck Pumps:
  • UDOR Pumps
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £113.71 incl tax

    UNLOADER 3 - BANJO TOP HALF WITH 3/8M OUTLET

    Banjo Unloader Valve - Upper Half, to fit: (See Products C0.190 / C0.290/ C0.390 for Lower Half)
  • Annovi Reverberi Pumps:
  • Comet Pumps:
  • Bertolini Pumps:
  • Interpump Pumps:
  • Speck Pumps:
  • UDOR Pumps
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £85.42 incl tax

    UNLOADER 4 - VRS 140 Bar - with BLACK Knob

    Panel Mountable 540 VR54 Unloader Valve ( Replacment for C2.023 )
  • Inlet: 3/8”M
  • Outlet: 3/8”M
  • Bar Rating: 140 Bar
  • Flow Rating: 30L/min
  • Temperature Rating: 90oC
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £58.82 incl tax

    UNLOADER 4 - VRS 180 Bar - with RED Knob

    Panel Mountable 540 VR54 Unloader Valve ( Replacment for C2.023 )
  • Inlet: 3/8”M
  • Outlet: 3/8”M
  • Bypass: 1x 3/8F”
  • Bar Rating: 180 Bar
  • Pressure Rating: 30L/min
  • Flow Rating: 90oC
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £58.82 incl tax

    UNLOADER 5 - BANJO c/w INJ + PRESS. SWITCH

    3/8M outlet with built in chemical injector; and 1/2F inlet. The mico switch is 15 amp rated. Suitable FOR VT7 & 350 PUMP and also used on the VTUF240 & RAPID VSC HOT pressure washers.
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £232.75 incl tax

    UNLOADER 6 - BANJO FOR XHD160

    Unloader for XHD160 pressure washer (or similar) - continuous running type. M22M outlet port; 1/2M (plastic) inlet port; Chemical injection with adjustment.
    £141.95 incl tax

    UNLOADER B - BPS STANDARD WITH HANDWHEEL

    Unloader Valve with Black Handwheel
  • MTM BP9 Panel Mount Unloader Valve
  • Max Pressure: 220 Bar (3100 psi)
  • Flow Rate: 30 L/m
  • Temperature Rating: 90 °C / 194 °F
  • Inlet: 3/8”F (Adaptors are available to make it compatible with all fittings)
  • Outlet: 3/8”F (Adaptors are available to make it compatible with all fittings)
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £123.79 incl tax

    UNLOADER B - BPS STANDARD WITHOUT HANDWHEEL

    Industrial Heavy Duty Unloader Valve
  • MTM BP9 Panel Mount Unloader Valve
  • Max Pressure: 220 Bar (3100 psi)
  • Flow Rate: 30 L/m
  • Temperature Rating: 90 °C / 194 °F
  • Inlet: 3/8”F (Adaptors are available to make it compatible with all fittings)
  • Outlet: 3/8”F (Adaptors are available to make it compatible with all fittings)
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £116.76 incl tax

    UNLOADER B - BPS WITH 15 AMP PRESSURE SWITCH

    Unloader Valve with Black Handwheel & 15 Amp Pressure Switch
  • MTM BP9 Panel Mount Unloader Valve
  • Max Pressure: 220 Bar (3100 psi)
  • Flow Rate: 30 L/m
  • Temperature Rating: 90 °C / 194 °F
  • Inlet: 3/8”F (Adaptors are available to make it compatible with all fittings)
  • Outlet: 3/8”F (Adaptors are available to make it compatible with all fittings)
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £154.74 incl tax

    UNLOADER B - BPS WITH EASY START FEATURE

    Unloader Valve with Black Handwheel & Easy Start Feature
  • MTM BP9 Panel Mount Unloader Valve
  • Max Pressure: 220 Bar (3100 psi)
  • Flow Rate: 30 L/m
  • Temperature Rating: 90 °C / 194 °F
  • Inlet: 3/8”F (Adaptors are available to make it compatible with all fittings)
  • Outlet: 3/8”F (Adaptors are available to make it compatible with all fittings)
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £122.06 incl tax

    UNLOADER BANJO - W1-0 8-11L/MIN

    Interpump W1 Banjo Type Unloader Valve
    Controlset ~ 8-11 Litres / Per Minute

    Fits Interpump 51 series pumps
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £189.85 incl tax
    Close