Welcome to Fenco Group
You have no items in your shopping cart.
Filters
Search
Close

UNLOADER VALVES

View as Grid List
Sort by
Display per page

UNLOADER 1 - VRTS PANEL MOUNT c/w Handwheel

C0.081P VRT3 Standard Unloader Valve with Handwheel; Pressure Gauge Port with panel mounting feature (see picture. Note: square plate not included)

Sturdy steel and brass construction

Adjustable unloader valve bypass for a power washer pump.
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £89.41 excl tax

    UNLOADER 1 - VRTS STANDARD WITH HANDWHEEL

    C0.081 VRT3 Standard Unloader Valve with Handwheel

    Sturdy steel and brass construction

    Adjustable unloader valve bypass for a power washer pump.
  • Max Pressure: 220 bar / 22 Mpa / 3200 psi
  • Permissible Pressure: 250 bar / 25 Mpa / 3650 psi
  • Flow Rate: 30 L/min / 8 USGpm
  • Max Water Temperature: 90°C / 195 °F
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £79.66 excl tax

    UNLOADER 1 - VRTS STANDARD WITHOUT HANDWHEEL

    C0.080 VRT3 Standard Unloader Valve:
    Sturdy steel and brass construction
    Adjustable unloader valve bypass for a power washer pump.
  • Max Pressure: 220 bar / 22 Mpa / 3200 psi
  • Permissible Pressure: 250 bar / 25 Mpa / 3650 psi
  • Flow Rate: 30 L/min / 8 USGpm
  • Max Water Temperature: 90°C / 195 °F
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £76.78 excl tax

    UNLOADER 1 - VRTS WITH 15 AMP PRESSURE SWITCH

    C0.083 VRT3 Standard Unloader Valve with 15 amp Pressure Switch

    Sturdy steel and brass construction

    Adjustable unloader valve bypass for a power washer pump.
  • Max Pressure: 220 bar / 22 Mpa / 3200 psi
  • Permissible Pressure: 250 bar / 25 Mpa / 3650 psi
  • Flow Rate: 30 L/min / 8 USGpm
  • Max Water Temperature: 90°C / 195 °F
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £109.56 excl tax

    UNLOADER 1 KIT - for bypass back to tank

    C0.081KITRT unloader kit for bypass back to tank. This is popular on engine driven machines to prevent over heating of the bypass water and pump damage if the unit is left running in bypass for longer periods of time. - The outlet port of the unloader is 3/8 female BSP (To convert to M22 male, order code: B14.1114 M22M x 3/8M adaptor) - The inlet to the filter is 1/2 female BSP (Suggested optional adaptors: MB8/MB12/NP 1/2m x 3/4m or MH08/12 1/2m x 3/4 brass tail) - The tail on the bypass takes 1/2 hose (suggested hose order code: BF1225 WASHFLEX PRO - 25m coil) - this full kit consists of: C0.082 + MH06/08 + MB6/MB8 + W6(x2) + MB6/FB8 + P13.6511AL
    £115.83 excl tax

    UNLOADER 1- VRTS WITH EASY START FEATURE

    C0.082 - VRT3 Standard Unloader Valve with easy start facilty - Ideal for engine or motor start up as it reduces the intial start load.

    Sturdy steel and brass construction

    Adjustable unloader valve bypass for a power washer pump.
  • Integrated Easy Start Valve
  • Max Pressure: 220 bar / 22 Mpa / 3200 psi
  • Permissible Pressure: 250 bar / 25 Mpa / 3650 psi
  • Flow Rate: 30 L/min / 8 USGpm
  • Max Water Temperature: 90°C / 195 °F
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £80.41 excl tax

    UNLOADER 2 - BANJO VT 3/8F-1/2F VTPS

    C0.0611 VT UNLOADER (3/8 BSP female outlet connection and 1/2 BSP female inlet connection) is the same as the C0.194 VT UNLOADER but excludes the injector and brass inlet coupling.
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £80.57 excl tax

    UNLOADER 2 - BANJO VT for VT5 VT6 VT3 VT4 PUMP

    'OptiSpare’ Universal Banjo Unloader Valve with inlet filter and chemical injector:
  • Max Pressure: 250 bar / 3700 psi
  • Flow Rate: 30 L/min
  • Max Water Temperature: 150°C
  • Body: Brass
  • Inlet: 1/2”F BSP or 3/4”F BSP (Compatable coupling to suite: MH12/08 or MH12/12 BRASS HOSE TAIL – 3/4” BSP MALE x (1/2 or 3/4”) TAIL or B1.134 KCQ DURAKLIX LP MALE COUPLING 3/4" M THR
  • Outlet: 3/8”F BSP with MSQ Quick Release (Compatable coupling to suite: B14.9191 or B14.9191SS MSQ DURAKLIX H.P QR MALE PLUG 3/8F)

    Banjo Bolt-on type Unloader Valve:

    Annovi Reverberi Pumps:
  • XT Pumps
  • XM Pumps
  • XR Pumps
  • HPE Pumps

    Comet Pumps:
  • FW Pumps

    Bertolini Pumps:
  • TW Pumps
  • TML Pumps
  • TWE Pumps
  • VML Pumps

    IMPORTANT SAFETY NOTE: BEFORE powering the system:

    Step 1: the unloader valve MUST be set at MINIMUM pressure;
    Step 2: The bypass port MUST be open;
    Step 3: Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment);
    Step 4: Set the locking nut/s so this pressure (the running pressure and the lock line pressure) cannot be exceeded.

    CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance
  • £135.88 excl tax

    UNLOADER 3 - BANJO LOWER HALF - A

    Banjo Unloader Valve - Lower Half, to fit: (See Product C0.091 / C0.094 for Upper Half)
  • Annovi Reverberi Pumps:
    XT Pumps
    XM Pumps
    XR Pumps
    HPE Pumps

  • Comet Pumps:
    FW Pumps

  • Bertolini Pumps:
    TW Pumps
    TML Pumps
    TWE Pumps
    VML Pumps
  • £40.42 excl tax

    UNLOADER 3 - BANJO LOWER HALF - B

    Banjo Unloader Valve - Lower Half, to fit: (See Product C0.091 / C0.094 for Upper Half)
  • Interpump Pumps:
    W91 Pump
    W99 Pump
    W154 Pump
  • Speck Pumps:
    NP16 Pump

  • Udor Pumps
  • £42.21 excl tax

    UNLOADER 3 - BANJO LOWER HALF - C

    Banjo Unloader Valve - Lower Half, to fit: (See Product C0.091 / C0.094 for Upper Half)
  • Interpump Pumps:
    W151 Pump
  • Comet Pumps:
    RW Pump
  • £45.58 excl tax

    UNLOADER 3 - BANJO TOP HALF C/W CHEM. INJ. & 3/

    Banjo Unloader Valve - Upper Half, to fit: (See Products C0.190 / C0.290/ C0.390 for Lower Half)
  • Annovi Reverberi Pumps:
  • Comet Pumps:
  • Bertolini Pumps:
  • Interpump Pumps:
  • Speck Pumps:
  • UDOR Pumps
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £94.76 excl tax
    Close