Welcome to Fenco Group
You have no items in your shopping cart.
Filters
Search
Close

UNLOADER B - BPS WITH 15 AMP PRESSURE SWITCH

Product Code: C0.033
Unloader Valve with Black Handwheel & 15 Amp Pressure Switch
  • MTM BP9 Panel Mount Unloader Valve
  • Max Pressure: 220 Bar (3100 psi)
  • Flow Rate: 30 L/m
  • Temperature Rating: 90 °C / 194 °F
  • Inlet: 3/8”F (Adaptors are available to make it compatible with all fittings)
  • Outlet: 3/8”F (Adaptors are available to make it compatible with all fittings)
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £154.74 incl tax
    + -
    Panel Mountable BP9 Heavy Duty Unloader Valve - with Pressure Switch
  • Flow Rate: 30 Litres per Minute / 8 USGpm
  • Temperature Rating: 90 °C / 194 °F
  • Voltage: 250v
  • Current: 15 Amps
  • Close