Welcome to Fenco Group
You have no items in your shopping cart.
Filters
Search
Close

UNLOADER 4 - VRS 140 Bar - with BLACK Knob

Product Code: C0.000B
Panel Mountable 540 VR54 Unloader Valve ( Replacment for C2.023 )
  • Inlet: 3/8”M
  • Outlet: 3/8”M
  • Bar Rating: 140 Bar
  • Flow Rating: 30L/min
  • Temperature Rating: 90oC
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £58.82 incl tax
    + -
    Used for adjusting the pressure in high pressure washing machines & systems.
    Panel Mountable Unloader Valve:
  • Inlet: 3/8” M
  • Outlet: 3/8”M
  • Bypass: 3/8”F
  • Bar Rating: 140 bar / 14 Mpa / 2030 psi
  • Permissible Pressure: 150 bar / 15 Mpa / 2175 psi
  • Flow Rating: 30L/min
  • Temperature Rating: 90 °C / 194 °F
  • Write your own review
    • Bad
    • Excellent
    Close