Welcome to Fenco Group
You have no items in your shopping cart.
Filters
Search
Close

UNLOADER 3 - BANJO TOP HALF WITH 3/8M OUTLET

Product Code: C0.091
Banjo Unloader Valve - Upper Half, to fit: (See Products C0.190 / C0.290/ C0.390 for Lower Half)
  • Annovi Reverberi Pumps:
  • Comet Pumps:
  • Bertolini Pumps:
  • Interpump Pumps:
  • Speck Pumps:
  • UDOR Pumps
  • IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £85.42 incl tax
    + -
    Banjo Bolt-on type Unloader Valve - Top Half, to fit: (See Products C0.190 / C0.290/ C0.390 for Lower Half)
  • Annovi Reverberi Pumps:
    XT Pumps
    XM Pumps
    XR Pumps
    HPE Pumps

  • Comet Pumps:
    FW Pumps
    RW Pumps

  • Bertolini Pumps:
    TW Pumps
    TML Pumps
    TWE Pumps
    VML Pumps

  • Interpump Pumps:
    W91 Interpump
    W99 Interpump
    W151 Interpump
    W154 Interpump

  • Speck Pumps:
    NP16 Interpump
  • UDOR Pumps
  • Flow Rate: 30 Litres per Minute / 8 USGpm
  • Temperature Rating: 90 °C / 194 °F
  • Knob Colour: Red
  • Pressure Rating: 220 Bar / 22 Mpa / 3200 PSI
  • Permissible Pressure: 250 Bar / 25 Mpa / 3630 PSI
  • Outlet: G 3/8 F - 3/8 NPT M
  • Close