Welcome to Fenco Group
You have no items in your shopping cart.
Filters
Search
Close

THREADLOCKER HYDRAULIC SEALANTS

View as Grid List
Sort by
Display per page

12M X 12MM THREAD TAPE

ZYLOCK PL040 Thread tape is the quality people are looking for. You will love the ease of applicaton and performance!
£2.68 incl tax

ZYLOCK DISPLAY STAND (excluding stock)

Stand only - excluding stock. Has the capacity to hold, 5 x PL010; 5 x PL011; 5 x PL020; 5 x PL030; 5 x PL031; 4 x PL041; 4 x PL050 . Ask us for a special kit price…
£53.71 incl tax

ZYLOCK GASKET SEALANT - 200MLPOWERCAN

Zylock PL050 Gasket Sealer is a Black RTV Silicone sealant of high performance that is low corrosivity and high temperature resistant.
Zylock PL050 is a high performance one component moisture curing gasket sealant for high temperature applications over 200°C. This Replaces almost any cut gasket. Resists cracking, shrinkage and migration. Can be applied to dress paper or cork pre-cut shapes.

Ideal for use with auto /workshop fluids and gases. Zylock PL050 Gasket Sealant has good resistance to weathering, vibration, moisture, ozone and extreme temperatures. Fully cured PL050 can be used for extended periods at temperatures up to 204°C. Bottle designed to give you all the contents, so no waste!
Eliminates leaks, reduces noise, absorbs vibration, seals and bonds assembly into a secure unit. IDEAL FOR: Gear boxes, engines and any other oil or fluid housing.

Method of Use
This solution is ready for use. Simply pull off the grey cap. Take off the nib of the spout using a sharp knife. Then tilt the bottle downwards, and gently press the trigger on the side of the bottle, and you should begin to see the black liquid; the professional Zylock Gasket Sealant is ready for use.
£35.23 incl tax

ZYLOCK HYDRAULIC SEALANT 50ML

Zylock PL020 Hydraulic Sealer is used for all the many types of hydraulic connections, sealing against typical pressure line ratings.

Use Hydraulic Seal to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints.
Especially formulated not to clog up systems, suitable for up to 400 bar pressures. Giving and oil-tolerant, vibration proof seal.

Method of Use
This solution is ready for use. Simply unscrew the white lid anti-clockwise. Take off the nib of the spout using a sharp knife. Then tilt the bottle downwards, and gently squeeze the bottle, and you should begin to see the brown liquid; the professional Zylock Hydraulic Sealant is ready for use.
£27.32 incl tax

ZYLOCK PIPE SEALANT - 50ML

Zylock PL041 White Pipe Sealer is an Instant Low Pressure sealant for fine and coarse threads up to 3” in diameter. This product gives and instant seal but has a slow cure to allow for elbows, joints etc. to be realigned after assembly.

PL041 is unusual in that it does not fully cure until some 60 hours after application, allowing re-alignment of elbows and joints. Once set, you can guarantee a satisfactory reliable lasting seal. Gives an instant seal but has a slow cure to allow for elbows, joints etc. to be realigned after assembly. Assists with lubrication during assembly of parts.

Ideal for: sealing any gas, chemical, water or steam pipes with coarse threads up to 3 inches.

Method of Use
This solution is ready for use. Simply take the wrapping off, and pull the lid off. Then tilt the bottle downwards, and gently press the dispenser at the top of the bottle, and you should begin to see the white liquid; the professional Zylock Pipe Sealant is ready for use.
£27.32 incl tax

ZYLOCK RETAINER 50ML HIGH STRENGTH

Zylock PL031 High Strength Retainer has been designed for the permanent retention of close fitting parts. It is a high strength, low viscosity securing compound, used for the retaining of cylindrical parts in situ with the ability to overcome light oil residue or contamination during assembly.

Zylock PL031 is ideal for slip for or interference fits on gears, pulleys, keyways, splined shafts, and bushes etc.
PL031: A high strength, fast curing retainer for securing all types of cylindrical parts. Reduces component fatigue by eliminating stresses within the assembly. IDEAL FOR: Securing bearings, shafts.

Method of Use
This solution is ready for use. Simply unscrew the white lid anti-clockwise. Take off the nib of the spout using a sharp knife. Then tilt the bottle downwards, and gently squeeze the bottle, and you should begin to see the green liquid; the professional Zylock High Strength Retainer.
£27.32 incl tax

ZYLOCK RETAINER 50ML STANDARD STRENGTH

Zylock PL030 Retainer & Bearing Fit offers a medium strength retainer for flat surfaces found on bearings and housings. Ease of disassembly with conventional tools enables the removal and replacement of parts in most maintenance applications.
PL030: Designed to secure all types of cylindrical parts which require dismantling. Cures once confined between parts. IDEAL FOR: Gears, Pulleys splined shaftys, keyways, bearings.

PL030 is of Medium Strength and is colour coded yellow for job identification. Where cure speed is long, acceptable bond times can be obtained by treating the parts with Activator or by using the faster Accelerator.

Method of Use
This solution is ready for use. Simply unscrew the white lid anti-clockwise. Take off the nib of the spout using a sharp knife. Then tilt the bottle downwards, and gently squeeze the bottle, and you should begin to see the yellow liquid; the professional Zylock Retainer.
£27.32 incl tax

ZYLOCK THREADLOCKER - HIGH STRENGTH 50ML

Zylock PL011 Permanent Threadlocker is a medium viscosity, high strength Stud locker for temperatures up to 150°C.
Zylock Permanent Threadlock is resistant to corrosive chemicals, extremes of shock and load, and has good gap fill ability.
It gives good resistance to vibration loosening, achieving up to 40Nm on pre-torqued steel studs and bolts.

Prevents corrosion and leakage, resists corrosive chemicals, fuels, and most industrial liquids and gases. Replaces double-nutting and welding.
Ideal for: refrigeration, air conditioning, general production line and process equipment

Method of Use
This solution is ready for use. Simply unscrew the white lid anti-clockwise. Take off the nib of the spout using a sharp knife. Then tilt the bottle downwards, and gently squeeze the bottle, and you should begin to see the blue liquid; the professional Zylock High Strength Threadlocker Sealant.
£27.32 incl tax

ZYLOCK THREADLOCKER - STANDADARD STRENGTH 50ML

Zylock PL010 Removable Threadlocker has been designed to prevent loosening and leakages from shock and vibration on all types of metal fasteners.

Whilst the Zylock Threadlock has locking and sealing capabilities, it is also removable with standard hand tools.
It is therefore ideal for securing components that require frequent opening during maintenance, but must withstand harsh environments such as:
  • Shock
  • Vibration
  • & Heat

    Method of Use
    This solution is ready for use. Simply unscrew the white lid anti-clockwise. Take off the nib of the spout using a sharp knife. Then tilt the bottle downwards, and gently squeeze the bottle, and you should begin to see the blue liquid; the professional Zylock Removable Threadlocker Sealant.
  • £27.32 incl tax
    Close