Welcome to Fenco Group
You have no items in your shopping cart.
Filters
Search
Close

PUMP VT6 - 1"F 206 BAR 15L

Product Code: VT6
V-TUF VT6 206 Bar (3030 PSI) Industrial Pump with 1" Shaft suitable for 1" horizontal shaft engines such as Loncin and HONDA GX240 ; GX340 ; GX390 and YANMAR diesel engines. The flow rate is 15 litres per minute. The VT6 comes complete with unloader valve with 3/4F inlet and MSQ female outlet. The VT6 pump is a replacement for WW961 , 961 or WS430080005-s.
  • Note: the pressure must be set to unload at no more than 206 BAR (3030PSI). See safety note below:
  • Inlet fitting options include: MH12/12 or MH12/08 brass hose tails or B1.134 KCQ coupling. VIEW: COUPLINGS – LOW PRESSURE and COUPLINGS – QR LOW PRESSURE
  • Outlet fitting option: B14.9191 or B14.9191SS MSQ male to 3/8F coupling. VIEW: COUPLINGS – HIGH PRESSURE and COUPLINGS – QR HIGH PRESSURE
  • The VT6 pump comes lubricated complete with V-TUF PRESSURE LUBE PL500.
  • OPTIONAL EXTRAS: C7.038BPKIT Pump priming valve kit ; E1.1013KIT PUMP SUCTION KIT (3m) ; PL500 V-TUF Pressure Lube (for pump top up)

    IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £408.52 excl tax
    £306.39 excl tax
    + -
  • Brass Manifold
  • Cool Operation
  • Precision Ground Crankshaft
  • Ceramic Plunger
  • Alloy Connecting Rod
  • Ball & Roller Bearings
  • Service kits:
  • Pump oil: PL500
  • VALVE KIT: VTPS3/5/6003 V-TUF VALVE KIT
  • HP SEAL KIT: VTPS3/5/6001 V-TUF SEAL KIT HP 15mm
    • Flow Rate 15 L/min
    • Pressure 206 bar
    • RPM 3400rpm
    • To Suit 8 to 13 HP Engine
    • Weight 9.5Kg
  • Adjustable pressure Banjo Unloader Valve
  • With stainless steel outlet and inline water filter.
  • Forged brass manifold, provides high strength and corrosion resistance.
  • Write your own review
    • Bad
    • Excellent
    Close