Welcome to Fenco Group
You have no items in your shopping cart.
Filters
Search
Close

FLOW CONTROL

View as Grid List
Sort by
Display per page

ADJUSTABLE SAFETY / PRESSURE RELIEF VALVE 1/4M IN

V-TUF C2.020 ADJUSTABLE BRASS SAFETY/PRESSURE RELIEF VALVE. Inlet thread: 1/4BSP male (13mmOD) ; Discharge tail: 6mm ; Total length (to the top of the lock nut): 73mm. MAX pressure: 250BAR/3600PSI ; Max flow: 30l/min-8USgpm.
£32.24 excl tax

NON RETURN VALVE - INLINE 1/4 TAILS

V-TUF C0.014 Inline Brass non-return valve commonly used in fuel and chemical lines to prevent back flow. Dimensions: Tail diameter: 8mm ; Valve total length: 54mm . Thread is sealed with PL040 PTFE TAPE or PL020 Zylock seal fluid
£16.40 excl tax

PRESSURE SWITCH - LARGE 40 BAR/15A 3 CORE LEAD

The C0.140 is a heavy duty (40 bar activated) PS6 pressure switch with a serviceable pin (quick lube feature - no tools - just remove U clip) and replaceable 15 AMP micro switch (order code: C0.500 ). 1 meter long cable.
An ideal as a direct replacement pressure switch for machines with the small C0.040M14 5 amp switch.
Please note: If you use as direct replacement for MTM or M pressure switches you must connect the blue wire where the red was connected and the red wire where the blue was connected.
The C0.140 comes standard with ¼” male BSP thread. (If you need a 3/8” BSP male thread, order the switch with MFB06/04 BRASS BUSH)
£33.73 excl tax

PRESSURE SWITCH - LARGE 'M' 15A 3 CORE LEAD

The C0.140M14 is a heavy duty pressure switch with a serviceable pin and replaceable 20 AMP micro switch (order code: C0.500 ).
An ideal as a direct replacement pressure switch for machines with the small C0.040M14 5 amp switch and a direct replacment for MTM BIG pressure switches.
Please note: if you replacing a C0.140 switch with this, you must connect the blue wire where the red wire was and connect the blue wire where the red wire was.
The C0.140M14 comes standard with ¼” male BSP thread. (If you need a 3/8” BSP male thread, order the switch with MFB06/04 BRASS BUSH)
£33.73 excl tax

STEAM VALVE - WITH RED KNOB 1/4M x 1/4M

V-TUF C1.510 STEAM VALVE with 1/4M x 1/4M coned connections. Commomly used for taping fluid off a high pressure system to reduce water flow through a boiler. Steam Pressure Regulator Valve Professional with Stainless Steel Piston. RATED PRESSURE: 220bar (3190 psi); PERMISSIBLE PRESSURE: 250bar (3625 psi); RATED TEMPERATURE: 160 °C (320 °F)
£31.17 excl tax
Close