Welcome to Fenco Group
You have no items in your shopping cart.
Filters
Search
Close

VT3 HIGH PRESSURE PUMP c/w gearbox 3/4"F206Bar13l

Product Code: VT3
210 Bar (3050 PSI) Industrial PUMP and GEARBOX with 3/4" Shaft suitable for 3/4" horizontal shaft engines such as Loncin and HONDA GX160 . The pump is low revving which decreases wear. The flow rate of 13 litres per minute is suitable for most water mains supplies. The VT3 comes complete with unloader valve with 3/4F inlet and MSQ female outlet.
  • Note: the pressure must be set to unload at no more than 210 BAR (3050PSI). See safety note below:
  • Inlet fitting options include: MH12/12 or MH12/08 brass hose tails or B1.134 KCQ coupling. VIEW: COUPLINGS – LOW PRESSURE and COUPLINGS – QR LOW PRESSURE
  • Outlet fitting option: B14.9191 or B14.9191SS MSQ male to 3/8F coupling. VIEW: COUPLINGS – HIGH PRESSURE and COUPLINGS – QR HIGH PRESSURE
  • The VT3 pump and gearbox comes lubricated complete with V-TUF PRESSURE LUBE PL500.
  • OPTIONAL EXTRAS: C7.038BPKIT Pump priming valve kit ; E1.1013KIT PUMP SUCTION KIT (3m) ; PL500 V-TUF Pressure Lube (for pump top up)

    IMPORTANT SAFETY NOTE: BEFORE powering the system: 1. the unloader valve MUST be set at MINIMUM pressure; 2. The bypass port MUST be open; 3. Then set the unloader to the required pressure (which MUST be LESS than the maximum unloader pressure of the unloader valve AND LESS than the maximum pressure of your equipment); 4. Set the locking nuts so this pressure (the running pressure and the lock line pressure) cannot be exceeded.
  • CAUTION: This is high pressure equipment and if the above safety and set up rules are not followed, serious damage to equipment and injury to humans can occur. The caps and joints can be blown clean out of their threads which cause dangerous projectiles. Please be free to ring 01522 787978 if you need any assistance.
  • £655.18 incl tax
    £491.39 incl tax
    + -
    • Brass Manifold
    • Cool Operation
    • Precision Ground Crankshaft
    • Ceramic Plunger
    • Alloy Connecting Rod
    • Ball & Roller Bearings
    • Service kits:
    • Pump oil: PL500
    • VALVE KIT: VTPS3/5/6003 V-TUF VALVE KIT
    • HP SEAL KIT: VTPS3/5/6001 V-TUF SEAL KIT HP 15mm
    • Flow Rate 12 L/min
    • Pressure 210 bar
    • RPM 1400rpm
    • To Suit 4 to 6 HP Engine
    • Weight 9.5Kg
    • Adjustable pressure Banjo Unloader Valve
    • With stainless steel outlet and inline water filter.
    • Forged brass manifold, provides high strength and corrosion resistance.
    Write your own review
    • Bad
    • Excellent
    Close